Thin walled spark plug spanner for 10mm plugs including the small long life PMR8B spark plug fitted to CARC models

 More than 5 in stock

05901930-z 05901930 GU05901930 05 90 19 30
 0590 1930 0590.1930 05.90.19.30

1 litre of Millers 85w-140 mineral based final drive oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure drive box oil SAE 85w140 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for axles and final drives.
Low friction transmission oil reduces axle noise.No need to use separate moly additive with this oil.

170ml required for bevel box lubrication on all models except V9 which uses 210ml

Please note this part CANNOT be posted outside of the UK mainland area

 This part is due back in stock soon, call 01484 841395 to reserve yours

Thick protective tank cover for your workshop. Ideal for preventing expensive damage to your motorcycle tank when working on your bike (avoid brake fluid spills etc...) and also useful for leaving on your bike when not in use to avoid accidental scratches. Special anti-slip material on underside secures cover to your motorcycle tank when in use. Upper side is nylon for ease of cleaning.

 1 in stock

Large dust cover for your bike when parked up in your garage. Prevents dust and dirt settling on your pride and joy. Also useful for hiding your bike from prying eyes when your garage door is open. Also see tank protector SIA00001 for extra protection.

Breathable, tear resistant fabric.

 1 in stock

S&B air filter. Chromed back, includes clip

This K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits PHBH 30, PHBH 28 and VHB 30 Dellorto carbs. See SIA00055 if you require a shorter but larger diameter filter. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pod type air filter for increased air flow

Made from a high performance twin layer foam this K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable (use hot soapy water). Best run dry for road. Fits VHB 29, VHB 30, PHBH28 and PHBH30 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

 This part is available by special order, request a quote

Oil filter cover with bolt

See ENA90444 for cover O ring

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 31 in stock

 19003400 GU19003400 19 00 34 00
 1900 3400 1900.3400 19.00.34.00

Basic service kit (no air filter) containing 1 x UFI oil filter, 2 x NGK BP7ES spark plugs, 2 x rocker cover gaskets and all crush washers and O rings to complete a service on your bike. Depending on model you may also require points (SIA19715), condensers (SIA19786) and air filter (SIA17113 for conical air filter, SIA28113 for flat type air filter)

Save £'s by buying everything in a service kit

Oils and lubricants available separately. The oils you need are 1 x OIA11036 and 1 x OIA08194 + 1 x OIA08193 or save time and hassle by ordering service oil kit OIA19000 with your service kit.

 3 in stock

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 5 in stock

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 5 in stock